Amicale Spitfire - Cyberspit - Forum Triumph Spitfire

Amicale Spitfire
Bienvenue sur Cyberspit !
Ce forum est réservé aux discussions autour des Triumphs.
Lisez-moi

Pour assurer la bonne réception de la réponse à votre message, pensez à enregistrer amicalespitfire.org sur la liste de vos adresses de confiance dans les paramètres de votre messagerie.

Envoyer un email directement à Quantik
Vous	Votre email (doit être valide pour une réponse !)
Sujet
Message
Recharger le fil	Cliquer une seule fois !

Quantik * 21/06/2023 15:21	re : Recommandation pompe à huile gt6
Pour GT6: With the oil pump assembled, clean and dry, measure the clearance between the inner and outer rotors, This must not exceed 0.010" (0.254 mm.). Measure the clearance between the outer rotor and body. This must not exceed 0.010" (0.254 mm.). Measure the rotor end clearance. This should not exceed 0.004" (0.102 mm.). Renew worn and unserviceable items. Fit the inner rotor to the oil pump housing followed by the outer rotor, with its chamfered face leading. Seat the assembly in the crankcase, attach the end plate and secure the assembly with three bolts.

Quantik *

21/06/2023
15:21

re : Recommandation pompe à huile gt6

Pour GT6:

With the oil pump assembled, clean and dry, measure the clearance between the inner and outer rotors, This must not exceed 0.010" (0.254 mm.).
Measure the clearance between the outer rotor and body. This must not exceed 0.010" (0.254 mm.).
Measure the rotor end clearance. This should not exceed 0.004" (0.102 mm.).
Renew worn and unserviceable items.
Fit the inner rotor to the oil pump housing followed by the outer rotor, with its chamfered face leading. Seat the assembly in the crankcase, attach the end plate and secure the assembly with three bolts.